Machining a BIG Cylinder Rod for Mining Excavator | Hitachi EX1900 Boom Lift
We need the BIG Lathe for this machining job! We are making a new cylinder rod for a Hitachi EX1900 Mining Excavator boom lift cylinder. The chrome rod is worn out, it has rust spots and fatigue fractures, so we are going to make a new cylinder rod. This shows the step by step process of removing the eye off the old rod, machining up a new rod and welding the eye onto the rod. First step is machining out the weld joint that holds the eye onto the old rod. Once we remove the eye off the rod we also press out the damaged bushing in our hydraulic press. We then start machining up the new cylinder rod by rough turning before finish machining the end for the piston and nut. We cut a 4mm thread pitch external thread for the nut before flipping the rod to machine the other end. We machine and drill a hole before fitting and stick welding the new rod eye in position. The eye is welded on using metal cored wire before press fitting the new bronze bushing. We finish the job by cleaning, wrapping and strapping the new rod and send it on it’s way to the customer.
In this video we are using:
- Shenyang CW6280B Centre Lathe
- MetalMaster HPM-150T Hydraulic Press
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
Join our Patreon Community: https://www.patreon.com/cuttingedgeengineering
Official CEE Merch shop: https://www.ceeshop.com.au
To see more follow us on online here:
TikTok: https://vt.tiktok.com/ZSdHhtN4h/
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
#australianmachinist #machineshop #machinist